Author Archive: Susan Adams

The Most Common Issues People Have with Colorado Roofs

While roofing problems of various types and severity can occur anywhere, in certain geographical areas, including Colorado, homeowners need to be prepared for more severe issues. While the state is great for outdoor activities and gives locals the opportunity to enjoy plenty of sunshine, the location and the terrain features of the Centennial State also increase the frequency of roofing issues – here are some of the most common ones identified by informed Parker roofing companies.

Damage by Trees

The climate in Colorado is great for vegetation – wherever you go in the state, you will see spectacular, large trees and the green in the region is greener than anywhere else. However, trees are not only great assets on any property – they also pose a hazard to roofs, especially during stormy periods. The high winds that are so commonly associated with Colorado storms might tear off large branches and limbs and drop them onto roofs, breaking roofing components and causing leaks. The solution is simple, though: the limbs overhanging roofs need to be regularly trimmed.

Clogged Gutters

The winds that come with storms carry lots of debris, such as twigs, dried leaves, feathers and dust, all of which can get deposited in the gutters, forming clogs. Clogged gutters cannot direct water away from the building, causing it to pour down the walls, often into the foundation, causing hard-to-detect, but severe damage to the building. To prevent such issues, homeowners need to perform regular inspections of their gutter pipes, to remove any clogs and to ensure that the pipes are fastened properly and perfectly functional.

Parker roofing companies repair roof leaks


Leaks are among the most common roofing issues in any climate zone, but they are more frequent in Colorado, where roofs are exposed not only to lots of rain, but to thick layers of snow, too. If you notice a damp patch on your ceiling or, even worse, if water starts dripping or pouring in your rooms, the first thing to do is to check the attic for any traces of water – the source of the leak is likely to be located right above those traces. Leaks are usually caused by cracks and holes developed by the roof covering material or by a flashing stripe that surrounds one of your roof openings and the best repair method is the replacement of the faulty component.

Structural Damage

The continuous action of water and the permanently high humidity can damage the wooden components of any roofing structure. Weakened and damaged beams and rafters can cause the roof to sag – an issue that is common and severe at the same time. In some cases, the damaged component can be replaced with special techniques that involve the lifting of the entire roof with special devices and installing temporary support until the repair is complete, but if the issue is neglected and damage affects too many of the wooden elements, the only solution is the replacement of the entire roof, including the covering material and the wooden structure. Fortunately, the issue can be prevented with regular roof inspections and meticulous, thorough roof maintenance.

Why You Should Be Using Steel Buildings

Steel buildings can be both practical and stylish. There are a number of ways to go about making them into something more of a product, the better ones being the ones that will serve the needs of the building for many years to come.

Steel buildings are becoming increasingly popular as they are flexible, and modular types of structures. Modular buildings are not so much used for larger-scale facilities, but rather small buildings in all sorts of different shapes and sizes, that are made of steel, brick or concrete. This makes it easier to design and construct new buildings with reduced costs and time investment than by choosing to build a traditional structure from scratch.

It is worth considering the size of the building before choosing the kind of steel material that you will use. Steel buildings require buildings with certain features, including more space and greater space efficiency. The more space you have the more opportunities you have to have more people in the building.

All commercial establishments and business houses need to create a degree of space, space efficiency. This includes in particular buildings for warehouses, offices, factories, schools, hospitals, airports, shopping malls, apartment buildings, and so on. Not only does this help to reduce work hours, but also it allows individuals to spend their time working on their own interests instead of working for a boss.

When steel buildings Colorado are constructed, the construction is all about the structure itself. The building structure must be designed from the inside out. The wiring, heating, ventilation, lights, etc. are essential components of the building’s design.

The amount of space steel buildings allow is very high. Even if the building has small rooms, it will still be able to comfortably accommodate many individuals. No matter what type of room, you will still be able to have a study, a living room, a den, or even a living room with a family room, if the desired measurements are met.

Steel buildings are also extremely durable. They are strong all the way through. This is essential in constructing a building in a given locality, as large cities could be built from several such buildings placed together.

Steel buildings are extremely light, while being able to take up a lot of space. Steel is a good material for building tall buildings, as the columns are made of steel, which are lighter, and in places, it is even stronger than concrete. Steel buildings are easy to assemble, but are very strong.

Steel buildings can be fitted with many different types of heating systems. Most areas in the world, including America, require heating of buildings to provide warmth and comfort. Steel buildings are perfect for heating in these climates.

Steel buildings are great in keeping the noise under control. They don’t have the hollow rumble that concrete buildings do, and, therefore, you don’t hear your neighbours through walls, doors and windows, and the sound is absorbed to a great extent.

Steel buildings are fantastic for every country in the world. From cheap, practical, and high-tech to expensive, fashionable, and efficient, steel buildings make a fine choice. And, in today’s climate, that should mean the choice is yours.

Are Your Windows Energy-Efficient?

Energy Efficient Replacement Window Denver Area

Windows provide our homes with light, thermal comfort and ventilation, but they can also have a negative impact on energy efficiency. The most significant heat loss occurs through the windows, so it is preferable to choose 4 seasons or low-e windows and high-quality frames that will reduce the heat transfer.

You can lower the energy costs by installing energy-efficient windows in your home. If your budget is modest, improving energy efficiency at existing windows is the best solution. However, if your home has very old and inefficient windows, it could be more cost effective to replace them than to attempt to improve their performance.

New energy-efficient windows will pay for themselves; when properly selected and installed, they can help minimize heating, cooling, and lighting costs. Improving your home performance involves designing, selecting, and installing the perfect window. A window is dependent on all its components. Nowadays, the technology behind frames and glass has become very sophisticated and the products are durable and efficient. Designers often specify different types of glass for different windows, depending on orientation, climate or building design.

How to determine the energy efficiency of your windows

On the price quotes that you get for windows, you will always find the U-value, which you have to consider if you want to be sure that the windows you get are energy efficient.

The U-value is the thermal transfer coefficient. It is used to evaluate the thermal insulation of a window and specifies the amount of heat (energy) that is lost through a surface of 1 m² every hour, under certain temperature conditions (interior and exterior) and is measured in W / m²K. The lower this value, the lower the energy loss through the window.

You need to be careful about these details when you study the price offer for windows. Uw refers to the overall heat loss of the window.  In calculating this value, you have to include the energy efficiency of the glass (Ug) and the frame (Uf).

Manufacturers typically display the energy efficiency of products using a rating from A to G. The energy-rated windows have the U-value displayed on the energy label. In some cases, high energy performance windows can have a higher value than less energy efficient windows. It may seem wrong, as low values ​​indicate high insulation levels. However, in such cases it is possible because it is another aspect of the window that makes it more efficient, such as the glass insulation, or the air layer separating the two glass panels.

To benefit from a higher Uw-value, consider that thermopane glass has a 75% average prevalence and choose thermopanw or tripane glass with high thermal properties.

You can choose from single-glazed, double-glazed or triple-glazed windows. Compared to conventional single-glass windows with an average Uw of 5.8 W / m²K, modern windows have maximum values ​​of up to 0.85 W / m²K. Opt for triple-glazed windows if you live in an area with low temperatures. However, make sure to take into account the profile you use: not any profile is suitable for this type of replacement window Denver dealers sell.

Besides considering the right type of windows for your home, professional installation is also particularly important to ensure their energy efficiency. Only this way, you can get the most of your windows, in terms of thermal comfort.


What Are the Uses of Commercial Roof Coatings?

Commercial Roof Coating Are Necessary

Roof coating products are designed to be sprayed or rolled onto roof surfaces to weatherproof the roof, to enhance its performance and to prolong its lifespan. Here is what roof coating products are used for in more detail and how they fulfil their roles.

Protection from the Harmful Effects of Water

Water is one of the worst enemies of any roof, especially in the case of flat roofs. The flatter the roof, the poorer its drainage capacities and the more prone it becomes to water ponding. Whatever material flat roofs are made from, prolonged exposure to water weakens the roof’s surface, causing leaks through which water seeps into the deeper layers of the roof, damaging important structural components and causing the premature failure of the roof.

Roof coating products are made from durable, water-resistant materials that can efficiently prevent water-related roof damage, such as leaks and structural damage. The coating material is usually sprayed or rolled onto the roof, forming a monolithic, seamless layer that prevents the penetration of water. The method of application uses no fasteners, which also means that the coating is not punctured with nails or screws, so there are no holes through which water could enter.

Protection from UV Radiation

Solar radiation is another one of nature’s forces that puts roofs to the test. The sun’s UV rays can cause the roof’s color to fade and it can also decompose the roofing material, weakening and aging it before time. If you need a coating for your commercial roof because your facility is located in a climate area where the roof is exposed to harsh solar radiation for prolonged periods, check the UV-resistance of the product that you have in mind – some coatings provide limited UV stability, therefore they work better in mild climates, but there are some, such as silicone, that have been designed to withstand even the strongest sunshine.

Energy Efficiency

Another important role of roof coatings is to enhance the roof’s ability to form an efficient energy barrier between the building interior and the outdoor environment. While the air inside the building that you have heated or cooled can escape through your doors and your windows, the roof is a much larger surface, therefore an improperly sealing roof surface is the biggest culprit for energy waste. Commercial roof coatings installed by commercial roofing Chicago experts offer a great solution for this issue as well: they enhance the roof’s energy-efficiency, sealing it and reinforcing it, preventing energy exchange through the roof. Roof coatings also come in many different colors, allowing you to choose light colors, even white, for facilities in really hot areas, thus reducing the heat absorbed by your roof and increasing your building’s energy efficiency even further.

Curb Appeal

Treating your faded roof with a coating product of the right color is a great way to refresh the appearance of your building without expensive roof replacement. Most coatings come in a wide range of colors and numerous manufacturers offer custom color services as well, giving you exactly the shade you want.

What Are The Advantages Of Used Pallet Racking?

used pallet racking Denver

Pallet racking is one of the most efficient racking systems for warehouses. It makes good use of both the depth and height of your storage facility, allowing your to keep large inventories even inside compact warehouses.

Why Should You Opt for Used Pallet Racking?

As a newly incorporated company – or one recovering from a financial setback – you want to be careful about how you spend the available budget. For certain fixed inventory items, it makes more sense to buy used than brand new. These are items for medium to long term use that are built to resist in conditions of intense use.

Used pallet racking Denver systems are a good example in this respect. Although they have a similar quality to new items, you will save a significant amount of money if you buy used. At the same time, used pallet racking has a lower depreciation rate compared to new racking systems. This means that you will get a full ROI (return on investment) in a shorter period of time for the used pallet racks compared to new ones.

What Other Key Benefits You Get From Buying Used Pallet Racking?

Beside the financial savings, pallet racking systems will help improve your business operations in several ways:

  1. Less Worries About Cleaning and Maintenance

When you buy something brand new, you tend to spend more on cleaning products and services because you want to preserve that shiny new look for as long as you can. In reality, the depreciation recorded in the accountancy is not affected by your efforts, because it is calculated following specific criteria.

Choosing used pallet racking means that you will be more pragmatic in allocating the budget for maintenance, cleaning and repairs. In time, your company will save a significant amount of money, without compromising on the adequate care your warehouse racking system needs.

  1. The Supplier Will Provide Installation Services

Brand new pallet racking systems are delivered in packages and you need to take care of the installation works. This means more costs for you, no matter how you decide to solve this issue: with your own employees or hiring extra hands.

By contrast, suppliers of used pallet racking are willing to help set them up for you in your warehouse for an affordable fee. The racking systems will be ready to use in a shorter time and without any hassle for you.

  1. You Get a Tested and Proven Racking System

New looks great but used proves its worth. This is something you should keep in mind when debating whether you should purchase a brand new pallet racking system or a used one.

Used pallet systems are sold after they reached maturity in terms of usability. You can get the full details about the previous use case, including the type of goods stored on the pallet racks, the maximum tested loading capacity, and other important details.

  1. It Is Easier to Inspect Used Pallet Racking Systems

A detailed acceptance inspection is impossible for new pallet racking systems, because they are packed in various boxes and shrink wrap film. Thus, if you get a defective part, you will have to wait until it is replaced by the supplier before your racking system is set up.

When you buy used pallet racking, you can arrange with the supplier to visit their premises and perform a thorough inspection of the system you want to buy. In this way, there are no uncertainties and no delays in your schedule after you purchase the used pallet racking.

Metal Building Insulation – Why You Need It and What Types You Can Choose From

Metal buildings, probably more than any other types of buildings, need to be properly insulated and not only because building regulations make it obligatory to insulate at least a part of the building (the only exception is carports, which are not required to be insulated), but also because it is the only way to make the building energy-efficient and long-lasting.

Why Do You Need Metal Building Insulation?

Metal, especially steel, conducts heat, and therefore metal constructions allow for the free transfer of humidity and heat in and out. When there is a significant difference between the temperature inside the building and the temperature outside, this may lead to the accumulation of condense which can cause rust and is harmful for whatever is kept inside the building as well as for human health. The materials used for insulating metal buildings create a vapor and heat barrier between the interior of the metal building and the exterior of it, maintaining both the temperature and the humidity inside relatively stable, thus preventing the appearance of condense.

Where to Install Insulation?

Before you start the insulation of any metal construction, you should check the applicable building regulations, but, in most cases, metal buildings are not required to be insulated all around. Depending on the energy-efficiency you are looking for and the purpose for which you will use the building, you can insulate only the roof or some of the walls.

Types of Metal Building Insulation

There are many different types of insulation used for preserving metal buildings in proper condition – here are the most common types:

–    Fiberglass – the cheapest solution of them all and the material that can be easily applied in a DIY fashion, fiberglass is perfect for insulating garages and workshops. The material is available in the form of panels or rolls, both easy to install and efficient,

–    Loose-fill insulation – another type of insulation that requires a specialist to install, but is on the cheap end of the range, loose-fill insulation consists of fiber pellets that are blown into walls through wall cavities. The material provides excellent protection against moisture, mold and condense and it is an excellent temperature and sound barrier,

–    Spray foam – this solution is a bit more expensive than the previous option, but provides much better insulation. Spray foam is usually installed by professionals with the help of a spray gun – the spray can be applied on the floor, on the walls and on the ceiling as well, so it is a great and easy to use, overall solution to improve the energy-efficiency of your building. Foam insulation also comes with the additional benefit of increasing the structural integrity of the metal building,

–    Polystyrene panels – this is the most expensive solution, but also the most efficient one. The rigid boards come in various thickness and width to allow you to choose the measurements that work best for your building and they can be installed on the inside of the walls or on the exterior of the building as well.

How to Choose from the Available Residential Fencing Options – Aspects to Consider

If you are currently in the process of choosing a fencing solution that will suit the features of your property as well as your requirements in terms of functionality and design, you probably know already that there are numerous residential fencing Denver area options that you can choose from, so here are a few criteria that you can take into consideration to make the choice easier.


Neighborhood Restrictions


Many districts and neighborhoods, especially areas with lots of historic buildings have regulations regarding the type, size and color of the fence you can install. Make sure you consult these regulations, find out if you are required to obtain any permits for the installation and it is a good idea to inform your closest neighbors about your intention to install a fence.




When you calculate the costs of your fence, include the price of the material, of the workmanship as well as the costs of the maintenance and eventual repairs:


  • Synthetic materials such as vinyl or PVC are the most durable and they require very little or no maintenance, but they are a bit more complicated and costly to install
  • Wood is attractive and affordable, but it needs to be maintained at least twice a year
  • Wrought iron is the most elegant and the most expensive fencing material that needs special techniques to install and has high maintenance needs as well
  • Aluminum fences are cheap and they require almost no maintenance at all, but their functionality is limited, being recommended more as a material for decorative fencing that for protection
  • Chain link fences are also cheap and durable options, but they are not very attractive, so they are used mainly as a solution for backyards or they are concealed with hedges or shrubbery.


What You Want to Achieve with the Fence


  • If you want your fence to delimitate your property, but you don’t need it to provide protection against intruders or prying eyes, you can use wood or synthetic materials to stay on the cheap side
  • If you want decorative fencing, choose aluminum or vinyl to add aesthetic appeal to your property
  • If you need protection against peeping, but you can do without enhanced security, choose wood or vinyl – you can have tall panels that will block any view of your property
  • If you need protection against trespassers, choose wood or wrought iron – the later solution will not stop passers-by to peep in, but it will certainly prevent them from jumping in
  • If you need a fence to keep children or pets confined in the yard, you can use any type of material as long as the fence is tall and solid enough. If you need to contain pets, it is a good idea to go for a design that in the lower section features solid fencing material that pets cannot chew or dig their way through and is attached directly to the ground to prevent your dog or rabbit from escaping between the panels.


Keep these aspects in mind and you will be able to choose the best fit for you.

Colorado Builders Offer Their Best Services To You

Colorado Springs! One of the best places to live in all the United States! The city is a great place for people seeking both business and pleasure. There are many job opportunities for those that are interested, and they pay well. Those that want to enjoy themselves will find a lot to like in this bustling city, as it offers a number of fun recreational activities to enjoy. Families with children have access to some very good kindergartens and schools. There are also many places of worship, so people of faith don’t need to worry that they will have to skip church on Sundays.

Obviously, Colorado Springs is one of the most sought after places in the state of Colorado. Many people would like to settle there by either buying or building a home from scratch. For the latter, there are many good Colorado builders to choose from. These specialize in building both regular and custom homes, making sure that the demands of the client are met with maximum fidelity.  It is good to note that there are construction jobs in Colorado Springs that offer great benefits to the skilled worker.

However, in order to find the best ones, you will need to take your time and do some research first.


How can you tell a professional home builder from an amateur one?

While most home builders in Colorado Springs are top of the line, you might still encounter a few duds here and there. The first quality you need to have when looking for a good home builder is patience. It is your job to go looking for them, not the other way around. Sure, they want to offer you their services, but with so many clients (the building industry is a very lucrative market in Colorado Springs), you need to make your demands known.

The first thing you could do, especially if you have never hired a home builder before, is to ask someone you know and trust who has done so in the past. It can be a relative, a friend or a co-worker. It doesn’t really matter what the person is. Just make sure that he or she is unbiased when talking about their preferred company.

It might seem surprising for some people, but testimonials are a very important part when looking for a professional home builder. If you ever get a chance to talk directly to company representatives, feel free to ask them all kinds of questions (relevant to the subject, of course), and ask them for feedback from their former clients. If they can’t offer you some solid reasons why you should pick their firm over another, don’t even bother with them, because they are not worth your time to begin with. Also, be sure to check their license and warranty policies to make sure everything is in order. Visit local organizations and government officials to see if the papers are ok.


Select only the best Colorado builders

Building a home is an investment for you and your children. Always take this seriously, plan ahead, and choose responsibly.

Shipping Container Rental – How It Works and Why It Can Be the Perfect Solution for You

Shipping container rental companies can help you solve all your storage needs quickly, efficiently and without high costs. The metal containers offered by rental companies are weather-tight boxes that can be dropped at the location where you need storage, then can be easily removed when you no longer the extra storage space – all you need to be able to receive the container is suitably sized level ground and you can use the box for storing whatever you need to, for as long as you need it and this convenience is just one out of the great benefits of rented containers.


Getting Just the Right Amount of Space


With shipping container rentals, you can have the storage space you need, not more, not less – here are the most common container sizes:


  • 5’ x 5’ boxes – the size of a small hall closet, these boxes are the smallest available;
  • 5’ x 10’ units – large enough to take up the contents of a walk-in closet,
  • 10’ x 10’ compartments – suitable for storing whatever can go into a one-bedroom apartment and the most sought-for size of them all,
  • 10’ x 30’ boxes – still a standard size, but so large they can take up the contents of a family home.


Besides these sizes, rental companies offer non-standard boxes as well, so if you have special storage needs, ask around, chances are you will be able to get the perfectly sized container.


Other Features Made Available by Shipping Container Rental Companies


Standard storage containers Colorado Springs has to offer are simple metal boxes made from 12-gauge or 14-gauge corrugated steel and fitted with one or two entrances and weather-proof features, but if you have special conditions for the items you want to move into the unit, you must know that you can find the right box for these special situations as well. Special boxes come with special features that include the following:


  • Lighting – if you need to use your storage container not only during the day, but at night as well, you can find containers that have lighting inside,
  • Special locks – if you need more protection for your valuables, you can find boxes with special fasteners, locks and padlocks,
  • Alarms – if you want to make sure the contents of your container are in perfect safety, request a box fitted with an alarm system,
  • Furnished – if you want to multiply the space you get inside the container, you can rent a container that comes with racks and shelves inside,
  • Most containers come with cargo doors as standard, but if roll-up doors suit you better, you can ask for units with that type of door as well,
  • Extra insulation – if you need the air inside the container to stay as stable as possible and you need constant humidity as well, you can ask for a box with special insulation.


You can expect similar flexibility and variety when it comes to paying for your shipping container– monthly billing is the standard, but many companies offer daily and weekly rates as well.

Suggestions For Successful Mixes Between Splendid Granite Counters And Complementary Kitchen Cabinets

For people in Denver, kitchen cabinets are a very important part of one’s kitchen, and they go hand in hand with the countertops, which is why it is important to coordinate the style and colors between the two, in order to avoid any unfortunate mishap and ruin the aspect of your kitchen.

Here are few ideas on how you can assort your cabinets and your counters to give off a great style and vibe:

  • A white kitchen, the classic in everyone’s dictionary, is perfect when you combine a type of white granite (the so-called „Bianco Romano”, featuring white, cream, bordeaux and gray shades) with light-colored cabinets, usually in warm white, beige or pure white. Add here a couple of nickel or bronze fixtures and you will get that out-of-the-catalogue look, unmatched and everlasting. Add a Bianco Romano countertop to cabinets made of walnut and medium oak, and you will get a homey look, cozy and warm, ready to invite you to cook something which will satisfy your desire.


  • A rusty kitchen, more connected to nature, can be obtained by mixing green granite with stain-grade cabinets, completed by bronze or copper utensils. This type of granite, called seafoam granite, has an earthy color, mixed with gray and brown. It is very pleasing and relaxing to the eyes and features geometric shapes inside the structure, which is why people love it. A similar combination can be an excellent turnout if you combine this type of seafoam granite with white painted cabinets – the feeling of home gets amplified by a mile!


  • If you want the warmth of the kitchen to engrave in your mind at all times, you can pick a combination between granite which is a shade of Bordeaux (the so-called ”Typhoon Bordeaux”, featuring tones of brick red, cream, brown and grey) and walnut or mahogany cabinets, which will bring your kitchen at the state of the art. For a similar cabinet color, you can also choose cherry wood or oak, while the floor must definitely have red undertones for a perfect match!


  • For a feel of the ocean, choosing a shade of grey and blue granite with white painted cabinets and nickel utensils can be dreamy. For a darker option, go with the combination between the type of granite called Costa Emeralda and stain-grade kitchen cabinets – it will give your cooking sanctuary a more masculine look, as opposed to the previous option, which is more feminine.


  • Black is always the classic color – for a splendid contrast, choose to combine black granite and pure white painted cabinets – the effect will be spectacular! Throw nickel or bronze fixtures in the equation, and you will get an unforgettable look for your kitchen. Avoid purchasing a dyed black granite and focus instead on buying a naturally colored one, even if it may be more expensive – the test of time will tell you have made the right choice!

Keep these tips in mind when choosing kitchen cabinets Denver dealers offer and counters for a splendid kitchen you’ll love to spend time in.